Engineering Specifications
  PLASTIC MOLDING |
---|
 ► Insert Molding |
 ► Injection Molding |
 ► Injection Compression Molding |
 ► Rotary Injection Molding |
 ► Shuttle Injection Molding |
 ► Transfer Molding |
 ► Compression Molding |
  PLASTIC MATERIALS |
---|
 ► Acetal |
 ► Acrylics |
 ► Acrylonitrile-butadiene Styrene (Abs) |
 ► Alkyds |
 ► BMC (Bulk Molding Compound) |
 ► Diallyl Phthalate (Dap) |
 ► Epoxy |
 ► Melamine-formaldehyde |
 ► Nylon |
 ► Phenolic |
 ► Polyamide-imide |
 ► Polyarylates |
 ► Polybutylene |
 ► Polycarbonate |
 ► Polyethylene |
 ► Polyimides |
 ► Polyketones |
 ► Polyphenylene Oxide, Modified |
 ► Polyphenylene Sulfide |
 ► Polypropylene |
 ► Polystyrene |
 ► SMC (Sheet Molding Compound) |
 ► Styrene Acrylonitrile |
 ► Sulfone Polymers |
 ► Thermoplastic Polyester (Saturated) |
 ► Thermoset Polyester |
 ► Urea-formaldehyde |
SULFONE POLYMERS
A family of engineering thermoplastic resins characterized by the sulfone group. Polysulfone is made by the reaction of the disodium salt of bisphenol with 4,4'- dichlorodiphenyl sulfone. These resins are heat-resistant plastics can be molded to tight tolerances and exhibit low creep under a sustained load at elevated temperatures and have excellent oxidation resistance and compressive strength.
Typical Applications:
Electrical and electronic applications and automotive parts.
Have any questions about materials and capabilities?
Contact Us through our online form or call 1-800-554-9208.