Engineering Specifications
  PLASTIC MOLDING |
---|
 ► Insert Molding |
 ► Injection Molding |
 ► Injection Compression Molding |
 ► Rotary Injection Molding |
 ► Shuttle Injection Molding |
 ► Transfer Molding |
 ► Compression Molding |
  PLASTIC MATERIALS |
---|
 ► Acetal |
 ► Acrylics |
 ► Acrylonitrile-butadiene Styrene (Abs) |
 ► Alkyds |
 ► BMC (Bulk Molding Compound) |
 ► Diallyl Phthalate (Dap) |
 ► Epoxy |
 ► Melamine-formaldehyde |
 ► Nylon |
 ► Phenolic |
 ► Polyamide-imide |
 ► Polyarylates |
 ► Polybutylene |
 ► Polycarbonate |
 ► Polyethylene |
 ► Polyimides |
 ► Polyketones |
 ► Polyphenylene Oxide, Modified |
 ► Polyphenylene Sulfide |
 ► Polypropylene |
 ► Polystyrene |
 ► SMC (Sheet Molding Compound) |
 ► Styrene Acrylonitrile |
 ► Sulfone Polymers |
 ► Thermoplastic Polyester (Saturated) |
 ► Thermoset Polyester |
 ► Urea-formaldehyde |
INJECTION COMPRESSION MOLDING
A method of molding where the plastic is injected into a partially open cavity with injection pressure typically 50-75% lower than in standard injection molding depending on wall thickness and mold open distance. The 2nd stage clamp action closes the telescoping core and subsequently compresses and distributes the melt into the far extremities of the cavity, including ribs and bosses.
Have any questions about materials and capabilities?
Contact Us through our online form or call 1-800-554-9208.