Engineering Specifications
  PLASTIC MOLDING |
---|
 ► Insert Molding |
 ► Injection Molding |
 ► Injection Compression Molding |
 ► Rotary Injection Molding |
 ► Shuttle Injection Molding |
 ► Transfer Molding |
 ► Compression Molding |
  PLASTIC MATERIALS |
---|
 ► Acetal |
 ► Acrylics |
 ► Acrylonitrile-butadiene Styrene (Abs) |
 ► Alkyds |
 ► BMC (Bulk Molding Compound) |
 ► Diallyl Phthalate (Dap) |
 ► Epoxy |
 ► Melamine-formaldehyde |
 ► Nylon |
 ► Phenolic |
 ► Polyamide-imide |
 ► Polyarylates |
 ► Polybutylene |
 ► Polycarbonate |
 ► Polyethylene |
 ► Polyimides |
 ► Polyketones |
 ► Polyphenylene Oxide, Modified |
 ► Polyphenylene Sulfide |
 ► Polypropylene |
 ► Polystyrene |
 ► SMC (Sheet Molding Compound) |
 ► Styrene Acrylonitrile |
 ► Sulfone Polymers |
 ► Thermoplastic Polyester (Saturated) |
 ► Thermoset Polyester |
 ► Urea-formaldehyde |
ALKYDS
Alkyds are thermosetting unsaturated polyester resins that are produced by reacting an organic alcohol with an organic acid, dissolved in and reacted with unsaturated monomers such as styrene, diallyl phthalate, diacetone acrylamide, or vinyl toluene. Alkyds also have excellent heat resistance and are dimensionally stable under high temperatures. As a molding material for compression molding, alkyds offer excellent dielectric strength.
Typical Applications:
Electrical applications like circuit breaker insulation, switchgear components, cases, housings, capacitor and resistor encapsulation, automotive parts, and coatings.
Have any questions about materials and capabilities?
Contact Us through our online form or call 1-800-554-9208.